1-phase QUINT POWER power supply-2866747 QUINT-PS/ 1AC/24DC/ 3.5

Nominal input voltage

100 V AC ... 240 V AC

AC input voltage range

85 V AC ... 264 V AC

DC input voltage range

90 V DC ... 350 V DC

Short-term input voltage

300 V AC

AC frequency range

45 Hz ... 65 Hz

DC frequency range

0 Hz

Current consumption

Approx. 1.4 A (120 V AC)

Approx. 0.8 A (230 V AC)

Inrush surge current

< 20 A (typical)

Power failure bypass

> 20 ms (120 V AC)

> 80 ms (230 V AC)

Input fuse

5 A (slow-blow, internal)

Permissible backup fuse

B6

B10

B16

Additional text

AC: 1 x circuit breaker - recommended fuse

Type of protection

Transient surge protection

Protective circuit/component

Varistor

Nominal output voltage

24 V DC ±1%

Setting range of the output voltage

18 V DC ... 29.5 V DC (> 24 V constant capacity)

Output current

3.5 A (-25°C ... 60°C, UOUT = 24 V DC)

4 A (with POWER BOOST, -25°C ... 40°C permanently, UOUT = 24 V DC)

15 A (SFB technology, 12 ms)

4 A (UIn ≥ 100 V AC)

Derating

60 °C ... 70 °C (2.5%/K)

Connection in parallel

Yes, for redundancy and increased capacity

Connection in series

Yes

Control deviation

< 1 % (change in load, static 10% ... 90%)

< 2 % (change in load, dynamic 10% ... 90%)

< 0.1 % (change in input voltage ±10%)

Residual ripple

< 50 mVPP (with nominal values)

Maximum power dissipation idling

3.5 W

Power loss nominal load max.

11 W

Width

32 mm

Height

130 mm

Depth

125 mm

Width with alternative assembly

122 mm

Height with alternative assembly

130 mm

35 mm

Net weight

0.5 kg

Operating voltage display

Green LED

Efficiency

> 88 % (for 230 V AC and nominal values)

Insulation voltage input/output

4 kV AC (type test)

2 kV AC (routine test)

Degree of protection

IP20

Protection class

I

MTBF (IEC 61709, SN 29500)

> 500000 h

Ambient temperature (operation)

-25 °C ... 70 °C (> 60 °C derating)

Ambient temperature (storage/transport)

-40 °C ... 85 °C

Max. permissible relative humidity (operation)

≤ 95 % (at 25 °C, no condensation)

Mounting position

horizontal DIN rail NS 35, EN 60715

Assembly instructions

Can be aligned: 5 mm horizontally, 15 mm next to active components, 5 cm vertically

Electromagnetic compatibility

Conformance with EMC Directive 2004/108/EC

Noise immunity

EN 61000-6-2:2005

Low Voltage Directive

Conformance with LV directive 2006/95/EC

Standard – Electrical equipment of machines

EN 60204

Standard - Safety of transformers

IEC 61558-2-17

Standard - Electrical safety

IEC 60950-1/VDE 0805 (SELV)

Shipbuilding approval

Germanischer Lloyd (EMC 2), ABS, LR, RINA, NK, BV

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations

EN 50178/VDE 0160 (PELV)

Standard – Safety extra-low voltage

IEC 60950-1 (SELV) and EN 60204 (PELV)

Standard - Safe isolation

DIN VDE 0100-410

DIN VDE 0106-1010

Standard – Protection against electric shock

DIN 57100-410

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment

DIN VDE 0106-101

Standard – Limitation of mains harmonic currents

EN 61000-3-2

Standard – Equipment safety

GS (tested safety)

Standard - Approval for medical use

IEC 60601

Approval - requirement of the semiconductor industry with regard to mains voltage dips

SEMI F47-0706 Compliance Certificate

Certificate

CB Scheme

UL approvals

UL Listed UL 508

UL/C-UL Recognized UL 60950

UL listed ANSI/ISA-12.12.01 class I, division 2, groups A, B, C, D

DeviceNet approval

DeviceNet™ Power Supply Conformance Tested