1-phase QUINT POWER power supply-2866750 QUINT-PS/ 1AC/24DC/ 5

Nominal input voltage

100 V AC ... 240 V AC

AC input voltage range

85 V AC ... 264 V AC

DC input voltage range

90 V DC ... 350 V DC

Short-term input voltage

300 V AC

AC frequency range

45 Hz ... 65 Hz

DC frequency range

0 Hz

Current consumption

Approx. 1.2 A (120 V AC)

Approx. 0.6 A (230 V AC)

Inrush surge current

< 15 A (typical)

Power failure bypass

> 30 ms (120 V AC)

> 30 ms (230 V AC)

Input fuse

5 A (slow-blow, internal)

Permissible backup fuse

B6

B10

B16

Additional text

AC: 1 x circuit breaker - recommended fuse

Type of protection

Transient surge protection

Protective circuit/component

Varistor

Nominal output voltage

24 V DC ±1%

Setting range of the output voltage

18 V DC ... 29.5 V DC (> 24 V constant capacity)

Output current

5 A (-25°C ... 60°C, UOUT = 24 V DC)

7.5 A (with POWER BOOST, -25°C ... 40°C permanently, UOUT = 24 V DC)

30 A (SFB technology, 12 ms)

7.5 A (UIn ≥ 100 V AC)

Magnetic fuse tripping

C2

Derating

60 °C ... 70 °C (2.5%/K)

Connection in parallel

Yes, for redundancy and increased capacity

Connection in series

Yes

Control deviation

< 1 % (change in load, static 10% ... 90%)

< 2 % (change in load, dynamic 10% ... 90%)

< 0.1 % (change in input voltage ±10%)

Residual ripple

< 40 mVPP (with nominal values)

Maximum power dissipation idling

3 W

Power loss nominal load max.

15 W

Width

40 mm

Height

130 mm

Depth

125 mm

Width with alternative assembly

122 mm

Height with alternative assembly

130 mm

43 mm

Net weight

0.7 kg

Efficiency

> 90 % (for 230 V AC and nominal values)

Insulation voltage input/output

4 kV AC (type test)

2 kV AC (routine test)

Degree of protection

IP20

Protection class

I

MTBF (IEC 61709, SN 29500)

> 500000 h

Ambient temperature (operation)

-25 °C ... 70 °C (> 60 °C derating)

Ambient temperature (storage/transport)

-40 °C ... 85 °C

Max. permissible relative humidity (operation)

≤ 95 % (at 25 °C, no condensation)

Mounting position

horizontal DIN rail NS 35, EN 60715

Assembly instructions

Can be aligned: 5 mm horizontally, 15 mm next to active components, 5 cm vertically

Electromagnetic compatibility

Conformance with EMC Directive 2004/108/EC

Noise emission

EN 50081-2

Noise immunity

EN 61000-6-2:2005

Low Voltage Directive

Conformance with LV directive 2006/95/EC

Standard – Electrical equipment of machines

EN 60204

Standard - Safety of transformers

IEC 61558-2-17

Standard - Electrical safety

IEC 60950-1/VDE 0805 (SELV)

Shipbuilding approval

Germanischer Lloyd (EMC 2), ABS, LR, RINA, NK, DNV, BV

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations

EN 50178/VDE 0160 (PELV)

Standard – Safety extra-low voltage

IEC 60950-1 (SELV) and EN 60204 (PELV)

Standard - Safe isolation

DIN VDE 0100-410

DIN VDE 0106-1010

Standard – Protection against electric shock

DIN 57100-410

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment

DIN VDE 0106-101

Standard – Limitation of mains harmonic currents

EN 61000-3-2

Standard – Equipment safety

GS (tested safety)

Standard - Approval for medical use

IEC 60601

Approval - requirement of the semiconductor industry with regard to mains voltage dips

SEMI F47-0706 Compliance Certificate

Certificate

CB Scheme

UL approvals

UL Listed UL 508

UL/C-UL Recognized UL 60950

UL listed ANSI/ISA-12.12.01 class I, division 2, groups A, B, C, D

DeviceNet approval

DeviceNet™ Power Supply Conformance Tested